Paste what's in your clipboard
 

This is an oldie but a goodie. Press CTRL-V and reveal what is in your computer's clipboard. No editing and no intentionally copying something amusing.


Sorry, was getting chiropractic adjustment

Huh, nothing. Strange. I remember copy/pasting stuff into EL earlier. Something must have blanked it.

But ‘http://www.facebook.com/home.php#/home.php?ref=logo’ is in my selection buffer.

Oren says (23:13):
one day i want to suck a cock :P
Oren says (23:13):
might be fun:P

No, really.

"2:1"

From a thread about Kill To death ratios in TF2. I made a reaction face and forgot about the thread.

But then with the alarming uptick in the number of rapists and zombies popping up out of the ditches I guess they do have a point.


Give me a minute to remember...

Apparantly, absolutely nothing.

www.cssjuice.com

How boring.

Alcar...

"ENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISPENISP ENISPENIS"

I was spamming some guy on Youtube.

http://i48.photobucket.com/albums/f2...3418258028.jpg

I forget what it was for.

http://www.crestock.com/blog/icon-of...gorsky-59.aspx


Was linking some sites to prove that a picture wasn't shooped.

>>Mitsubishi Cs35405 - Shrunken From Top And Bottom, changed vert. ic and caps, bulletin?

Hey Gregg ,
They are talking about Mitsubishi Bulliten Ctv-78
Put a .01 Cap On Pin 36 Of Ic700 To Ground.This is to prevent data corruption.
Most of the time all the Eprom Settings are lost. Sometimes just poor color or reduced Hor/Vert/Pcc,ECT.
If thats the case then you will need to adjust Vht (Vertical Ht.),Pam (E-W Parabola Pcc-Amp),
Hwd (Horizontal Width),Vsc (Vert Lin), Vsh (Vert Position), Pph (Pincushion Phase) via the Service Menu.
If it's only the reduced vertical then Set Vsc To 2 And Vht To 100 as a base setting.
Vht (Vertical Height) Is Item Number 10 if thats maxed out then thats not you problem
To Enter Service Mode, Use Customers Remote. Press In Sequence Menu, 2, 3, 5, And 7.
Use Video Button To Change Item, Audio Button To Adjust. Press Enter Button When Done
To Save Adjustments. Press Menu Button Twice To Leave Service Mode.
If this is not your problem keep in mind the B+ for the vert is on the SMPS it's not scan derived.
The B+ Comes From D9560 And R9560 on the Power Supply board. Check all SMPS caps also.
If you don't have an ESR meter just change ALL of the caps mention in this post.
Below are some tips from mits for this model. I did a service call on one of these awhile back
and I brought the board back and changed all the caps and vert ic and even checked it with
a spare 35" tube at the shop and all was good. When I returned to reinstall the board I had the
same problem,Reduced Vertical. Turned out in that instance the yoke was bad,PART # YSM-93058A
Good luck

"Arthas
Is
Not
Undead or living
He is
An entity
Get it?"

I got nothin'.

Nothing to paste... Hmmm.. :-(

^ woot! I actually cut the above text and pasted it!

Here's what I ha...

Oooooh no we're not gonna post that... XD

It can't possibly be as bad as mine...

http://www.youtube.com/watch?v=Dn9970dxQ2g

Was showing a friend this.

"A composer is a guy who goes around forcing his will on unsuspecting air molecules, often with the assistance of unsuspecting musicians." - Frank Zappa (1940 - 1993)

I was quoting Frank Zappa. Quite evidently.

"3 DAYS
Josh.... says:
pfft id tell him to go fuck himself
Simon: Invigorate the proletariat with COMMIE MAGIC says:
No you wouldn't you lying turd.
Josh.... says:
nah i would if he pissed me off enough
Simon: Invigorate the proletariat with COMMIE MAGIC says:
He'd pull that stare and oyu'd be FUCKED like a BEARS ASS."

Discussing my missing co-op last week.

Catalysis is the process in which the rate of a chemical reaction is increased by means of a chemical substance known as a catalyst. Unlike other reagents that participate in the chemical reaction, a catalyst is not consumed by the reaction itself. The catalyst may participate in multiple chemical transformations.

The general feature of catalysis is that the catalytic reaction has a lower rate-limiting free energy change to the transition state than the corresponding uncatalyzed reaction, resulting in a larger reaction rate at lower temperature. However, the mechanistic origin of catalysis is complex. Catalysts may affect the reaction environment favorably, e.g. acid catalysts for reactions of carbonyl compounds, form specific intermediates that are not produced naturally, such as osmate esters in osmium tetroxide-catalyzed dihydroxylation of alkenes, or cause lysis of reagents to reactive forms, such as atomic hydrogen in catalytic hydrogenation.

Kinetically, catalytic reactions behave like typical chemical reactions, i.e. the reaction rate depends on the frequency of contact of the reactants in the rate-determining step. Usually, the catalyst participates in this slow step, and rates are limited by amount of catalyst. In heterogeneous catalysis, the diffusion of reagents to the surface and diffusion of products from the surface can be rate determining. Analogous events associated with substrate binding and product dissociation apply to homogeneous catalysts.

http://www.deviantart.com/#order=9&q=dragon+rider

I think that I was moving pages to a new window.

Riiiiight.

That quote was so awesome I blacked out for a few seconds when I read it.



I think this is left over from some element studying I had to do for chemistry class. Maybe.

http://i25.tinypic.com/29kx8hd.jpg

Kay....I just got home.

I think it might have been going to go in the beliefs blog this morning.